Shopping Basket
You Recently Viewed

 

 

 

 

 

Trend LOCK/JIG
  Zoom

Trend LOCK/JIG

Our Price:  £63.00
List Price:  £89.99
Saving Of:  30%
(Inc. 20% VAT)

Availability:  

  

In stock, immediate dispatch


Tell a Friend

TREND LOCK/JIG LOCK JIG
FEATURES

This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks
For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1" face-plate
Deeper mortises can be achieved with a suitable size of auger bit
Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood
Steel plates & body
The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter
SPECIFICATION

Includes templates for locks having the following face-plate dimensions:
Imperial (Metric): Template
7/8"x 1/8" (22.2x156 mm): 1
7/8"x 6 " (22.5x152.5 mm): 2
1"x 4 3/4" (25.4x121 mm): 3
1"x 5" (25.4x127.5 mm): 4
1"x 5 1/4" (25.4x133.5 mm): 5
1"x 5 3/4" (25.4x145 mm): 6
1"x 6" (25.4x153 mm): 7
1"x 6" (25.4x156.5 mm): 8
1"x 6 1/2" (25.4x165.5 mm): 9
1"x 7" (25.4x177 mm): 10
1"x 2 1/4" (25x57.5 mm): 11 UPPER
1"x 2 1/4" (26x56.5 mm): 11 LOWER
1"x 6 3/8" (25.6x162mm: 12
MORTISE DIMENSIONS

Imperial (Metric): Template
5/8" x 2 7/8" (16x72 mm*+): A
5/8" x 4 1/4" (16x107 mm*): B
3/4" x 3 1/8" (19x78 mm*): C
3/4" x 4 1/4" (19x109 mm*): D
*These are maximum mortise lng., unless radius ends are squared with a chisel
+Note:actual size of mortise 16x79 mm (5/8" x 3 7/64")

SKU Code:  lock_jig
Brand:  Trend

Brand:  Trend

TREND LOCK/JIG LOCK JIG
FEATURES

This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks
For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1" face-plate
Deeper mortises can be achieved with a suitable size of auger bit
Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood
Steel plates & body
The jig requires a plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter
SPECIFICATION

Includes templates for locks having the following face-plate dimensions:
Imperial (Metric): Template
7/8"x 1/8" (22.2x156 mm): 1
7/8"x 6 " (22.5x152.5 mm): 2
1"x 4 3/4" (25.4x121 mm): 3
1"x 5" (25.4x127.5 mm): 4
1"x 5 1/4" (25.4x133.5 mm): 5
1"x 5 3/4" (25.4x145 mm): 6
1"x 6" (25.4x153 mm): 7
1"x 6" (25.4x156.5 mm): 8
1"x 6 1/2" (25.4x165.5 mm): 9
1"x 7" (25.4x177 mm): 10
1"x 2 1/4" (25x57.5 mm): 11 UPPER
1"x 2 1/4" (26x56.5 mm): 11 LOWER
1"x 6 3/8" (25.6x162mm: 12
MORTISE DIMENSIONS

Imperial (Metric): Template
5/8" x 2 7/8" (16x72 mm*+): A
5/8" x 4 1/4" (16x107 mm*): B
3/4" x 3 1/8" (19x78 mm*): C
3/4" x 4 1/4" (19x109 mm*): D
*These are maximum mortise lng., unless radius ends are squared with a chisel
+Note:actual size of mortise 16x79 mm (5/8" x 3 7/64")

Be the first to Write a Review for this item!